KCL Outdoors Stump Grinding
(901) 355-3112Free estimate

Stump grinding · Millington, TNGet the stump out. Get the yard back.

Family-owned in Millington since 2024, working across the Mid-South. We grind stumps below grade with a tracked Bandit that fits through a backyard gate, and the same crew can lay sod or fix the drainage once it's gone.

Call (901) 355-3112Get a free estimate

Family owned & operated·Serving the Mid-South since 2024·Free estimates

KCL Outdoors' Bandit SG-40 stump grinder on a pile of fresh grindings in a wooded Millington backyard
What we do

Stumps first. Then whatever the yard needs next.

Stump grinding is the job we're known for. The rest of the list is what a yard usually needs once the stump is gone, so you're not lining up a second contractor to finish it.

01
Stump grinding

Ground 4 to 6 inches below the surface for a lawn, deeper if you're setting a post or pouring a slab over the spot. The grinder is 29 inches wide, so it reaches backyards a tow-behind can't.

How stump grinding works →
02
Tree work

Trees that need to come down, and the cleanup after ones that already have. Have the stump ground in the same visit and it's one trip instead of two.

See the service →
03
Sod prep & installation

The step most people skip after a stump. Chips out, topsoil in, graded flat, sod down, so the spot disappears instead of settling into a dip.

See the service →
04
Drainage

Standing water after a Mid-South rain usually has a fixable cause: a low spot, a downspout with nowhere to go, clay that won't take water. French drains, catch basins, regrading.

See the service →
05
Irrigation

Sprinkler systems that put water on the grass and not the driveway. If we're grinding near existing heads, point them out; 811 doesn't mark them.

See the service →
06
Exterior lighting

Low-voltage lights for paths, trees, and the house, so the yard is still usable when it's dark by five in December.

See the service →
07
Concrete

Pads, walks, and steps, formed square and poured on a base that's been compacted instead of scraped.

See the service →
08
Hardscape design

Paver patios, retaining walls, borders. The part of the yard you build once.

See the service →
How it goes

Text a photo. Get a number. Pick a day.

1

Send a photo

Text a picture of the stump to (901) 355-3112 with something in it for scale, a boot or a tape measure. Say what's around it: fence, sprinkler heads, a gas meter.

2

Get a price

The estimate is free. Grinding is priced on its own; sod, drainage, or anything else you want after is priced on its own too, so you can take one without the other.

3

Job day

The grinder comes through the gate on tracks, the stump goes to chips, and the chips get raked level into the hole. A typical yard stump takes well under an hour on the machine; the setup and the walk-in are where the time goes.

Who you're dealing with

A family business out of Millington

KCL Outdoors is Chris Stackler and family, at it since 2024. It's a sole proprietorship, which means the person who answers your text is the person who runs the grinder, and the price you get comes from the guy who has to make it work in your yard. Stump grinding is what we're known for. Everything else on the list is what a yard tends to need once the stump is gone: grading and sod, drainage that actually drains, a walk or a slab, lights.

— Chris Stackler, KCL Outdoors

More about KCL →
Wide flush-cut stump beside a weathered wood privacy fence with the grinder pulled up to it
Recent work

Every one of these was somebody's backyard

Before and after, same spot. The chips in the after shots are what a stump turns into; they get raked level, and the spot can be seeded or sodded over.

BeforeLarge stump with the KCL grinder's guard against it, beside a rusted red metal barn wall
AfterSame spot by the red barn after grinding, fresh wood chips raked level
A wide stump tight against a barn's metal wall, ground out without touching the siding.
BeforeWide flush-cut stump beside a weathered wood privacy fence with the grinder pulled up to it
AfterLevel ground of fine wood chips where the stump was, along the same fence
A flush-cut stump along a privacy fence, taken below grade and raked level.
BeforeFresh-cut tree rounds and a root flare on a lawn next to a brick house with black shutters
AfterBed of wood chips where the stump stood, in front of the same brick house
A tree taken down to rounds beside the house, then the stump and root flare ground out.
BeforeLarge round stump with exposed soil around it near a wooden fence gate
AfterRaked, level bed of chips and soil where the stump was, near the fence gate
A big round stump by the back gate, gone, with the spot ready for seed.
Where we work

Based in Millington. Working across the Mid-South.

Home base is Millington, on the north side of Shelby County. From there the work runs through the neighboring towns and across the county lines that make up the Mid-South. The full list, and what to expect job-wise in each place, is on the service areas page. Not sure you're inside it? Text the address with the photo and we'll tell you.

All service areas →

Questions people ask

Straight answers before you call

How much does stump grinding cost?

It depends on the stump, and the honest way to price one is to see it. What moves the number: the width at the ground (not at the cut, which is always smaller), how deep you need it, surface roots you want gone, and whether the grinder can drive to it or has to be walked in. Across the trade, extra stumps on the same trip run less than the first one, since the setup is already done. Text a photo with something in it for scale and you'll get a free estimate.

How deep do you grind?

The Bandit we run cuts up to 12 inches below grade. For grass, 4 to 6 inches is plenty. If you're setting a fence post, planting a new tree in the same hole, or pouring a slab over the spot, say so and it goes deeper. The roots out past the stump stay in the ground and break down over a few years, which is normal and doesn't hurt anything.

What happens to the wood chips?

A stump turns into more chips than you'd expect, two or three times the size of the stump itself. The usual move is to rake them back into the hole and mound them a little, since they settle as they break down. If you want grass there this season, the chips need to come out and topsoil goes in; that's the sod prep on our list. Hauling the chips off is an option, and it changes the price.

Will the stump grow back?

Most won't. A few trees are stubborn about it: Bradford pear, sweetgum, crepe myrtle, mimosa, hackberry, and elm will throw sprouts from roots left in the ground. Grinding takes out the crown of the stump, which is where most of that regrowth starts. Sprouts that show up later can be mowed or cut and give up after a season or two.

What should I do before you come?

Two things. First, tell us where your private lines run: irrigation, dog-fence wire, landscape lighting, a septic line, the downspout drain. Tennessee 811 marks gas, electric, water, and fiber for free with three working days' notice, but it won't mark anything past your meter; those are yours to point out. Second, clear the path. The grinder is 29 inches wide and runs on tracks, so a 32-inch gate works, but a trampoline or a firewood pile in the way doesn't.

Can I just rent a grinder?

Under about 8 inches across, sure. A rental unit and a Saturday will handle it. Over that, rental machines bog down and you spend the day feeding them. A big oak or pecan stump with surface roots is a different job entirely, and it's what a tracked grinder is built for. Text a photo and ask; if it's a rental job, we'll say so.

Free estimate

Send a photo. We'll send a number.

The fastest way to a price is a picture of the stump with something in it for scale. Text it to (901) 355-3112, or use the form and we'll text you back. If the phone rings through, we're probably running the grinder.

Call (901) 355-3112

Text a photo instead

Get a free estimate

No spam, no list. Your number is used to text you back about this estimate.

Call (901) 355-3112